Hi, Guest!

BOSCOSEAL PU - HT Ex. BOSTIK

Update Terakhir
:
01 / 08 / 2016
Min. Pembelian
:
1 Galon
Harga
Hubungi Kami
Bagikan
:

Detail BOSCOSEAL PU - HT Ex. BOSTIK


DESCRIPTION


Bostik BoscoSeal Top – HT is  a one-component, ready to use, elastic, semi-rigid, wear resistant, cold applied, aliphatic polyurethane waterproofing top-coating membrane with excellenmechanical and chemical, thermal, UV resistance.


 


    USES :


•     Easy and fast application


•     Provides a seamless waterproofing membrane


•      Highly resistant  to abrasion, water  and root penetration


•      Unaffected by weather  conditions. Provides excellent weather and UV resistance


•     UV and colour stable


•     Provides “easy to clean” surface


•     Water vapour permeable


•      Very good abrasion resistance and suitable for walkways, pedestrian traffic, heavy duty areas, industrial areas.



•     Crack bridging capability up to 2 mm


•      Provides excellent thermal resistance over a temperature span of – 30 ºC to + 90 ºC


•      Resistan to  salty water aqueous  solution, bases, diluted acids, aliphatic solvents, benzene and mineral oils


•      Impregnates  by penetrating  deeply into all mineral and concrete  surfaces with high adherence


•      Fills the  non-structura capillary cracks  by decreasing water-absorbency of the concrete construction


•      Hardens the upper surface of the concrete by deeply penetrating into the surfaces


 


 


 


APPLICATION INSTRUCTION


1.   After the Boscoseal PU-X, Bostik BoscoSeal Top – HT has be to be applied in  a short  period of time  as a topcoat (not later than 36 hours)


2.  Bostik BoscoSeal Top – HT has to be stirred well with an electrical mixer before the application.


3.  When the product becomes homogenous apply the product with a brush or roller until the surface is fully covered.


4.  Optional, if a 2nd coat is needed, it has to be applied within 3 – 6 hours (not later than 36 hours)




 


 


 


 




 


 


5.  The Bostik BoscoSeal Top – HT must always be used over Boscoseal PU-X which was previously sprinkled with oven dry silica sand that creates an adhesion bridge between the layers.


6.  As an option, I can also be applied by an airless spray.


 


AREAS OF APPLICATION


•     Roofing


•     Balconies, terraces


•     Pedestrian decks and walkways


•      Heavy duty areas (parking  decks, industrial areas, malls, stadiums etc…)


 


AFTER APPLICATION


Newly applied surfaces should be protected from water min for 4 hours The Bostik BoscoSeal Top – HT is slippery when or during rain. In order to get an anti-slip surface dry quarz sand can be sprinkled during curing period of the membrane.


 


PACKAGING


25 kg and 5 kg metal can.



 

Tampilkan Lebih Banyak

pt. anugerah mandiri waterproof
pt. anugerah mandiri waterproof

PT. ANUGERAH MANDIRI WATERPROOF

Anggota PREMIUM 12 Tahun
JL. RAYA BANGKINGAN NO.06 RT.03 RW.01 LAKARSANTRI, SURABAYA
Indonesia 60214
SURABAYA
-
08XX-XXX-XXX

Detail BOSCOSEAL PU - HT Ex. BOSTIK


DESCRIPTION


Bostik BoscoSeal Top – HT is  a one-component, ready to use, elastic, semi-rigid, wear resistant, cold applied, aliphatic polyurethane waterproofing top-coating membrane with excellenmechanical and chemical, thermal, UV resistance.


 


    USES :


•     Easy and fast application


•     Provides a seamless waterproofing membrane


•      Highly resistant  to abrasion, water  and root penetration


•      Unaffected by weather  conditions. Provides excellent weather and UV resistance


•     UV and colour stable


•     Provides “easy to clean” surface


•     Water vapour permeable


•      Very good abrasion resistance and suitable for walkways, pedestrian traffic, heavy duty areas, industrial areas.



•     Crack bridging capability up to 2 mm


•      Provides excellent thermal resistance over a temperature span of – 30 ºC to + 90 ºC


•      Resistan to  salty water aqueous  solution, bases, diluted acids, aliphatic solvents, benzene and mineral oils


•      Impregnates  by penetrating  deeply into all mineral and concrete  surfaces with high adherence


•      Fills the  non-structura capillary cracks  by decreasing water-absorbency of the concrete construction


•      Hardens the upper surface of the concrete by deeply penetrating into the surfaces


 


 


 


APPLICATION INSTRUCTION


1.   After the Boscoseal PU-X, Bostik BoscoSeal Top – HT has be to be applied in  a short  period of time  as a topcoat (not later than 36 hours)


2.  Bostik BoscoSeal Top – HT has to be stirred well with an electrical mixer before the application.


3.  When the product becomes homogenous apply the product with a brush or roller until the surface is fully covered.


4.  Optional, if a 2nd coat is needed, it has to be applied within 3 – 6 hours (not later than 36 hours)




 


 


 


 




 


 


5.  The Bostik BoscoSeal Top – HT must always be used over Boscoseal PU-X which was previously sprinkled with oven dry silica sand that creates an adhesion bridge between the layers.


6.  As an option, I can also be applied by an airless spray.


 


AREAS OF APPLICATION


•     Roofing


•     Balconies, terraces


•     Pedestrian decks and walkways


•      Heavy duty areas (parking  decks, industrial areas, malls, stadiums etc…)


 


AFTER APPLICATION


Newly applied surfaces should be protected from water min for 4 hours The Bostik BoscoSeal Top – HT is slippery when or during rain. In order to get an anti-slip surface dry quarz sand can be sprinkled during curing period of the membrane.


 


PACKAGING


25 kg and 5 kg metal can.



 

Tampilkan Lebih Banyak