Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
DESCRIPTION
Bostik BoscoSeal Top – HT is a one-component, ready to use, elastic, semi-rigid, wear resistant, cold applied, aliphatic polyurethane waterproofing top-coating membrane with excellent mechanical and chemical, thermal, UV resistance.
use :
• Crack bridging capability up to 2 mm
• Provides excellent thermal resistance over a temperature span of – 30 ºC to + 90 ºC
• Resistant to salty water, aqueous solution, bases, diluted acids, aliphatic solvents, benzene and mineral oils
• Impregnates by penetrating deeply into all mineral and concrete surfaces with high adherence
• Fills the non-structural capillary cracks by decreasing water-absorbency of the concrete construction
• Hardens the upper surface of the concrete by deeply penetrating into the surfaces
APPLICATION INSTRUCTION
1. After the Boscoseal PU-X, Bostik BoscoSeal Top – HT has be to be applied in a short period of time as a topcoat (not later than 36 hours)
2. Bostik BoscoSeal Top – HT has to be stirred well with an electrical mixer before the application.
3. When the product becomes homogenous apply the product with a brush or roller until the surface is fully covered.
4. Optional, if a 2nd coat is needed, it has to be applied within 3 – 6 hours (not later than 36 hours)
5. The Bostik BoscoSeal Top – HT must always be used over Boscoseal PU-X which was previously sprinkled with oven dry silica sand that creates an adhesion bridge between the layers.
6. As an option, I can also be applied by an airless spray.
AREAS OF APPLICATION
• Roofing
• Balconies, terraces
• Pedestrian decks and walkways
• Heavy duty areas (parking decks, industrial areas, malls, stadiums etc…)
AFTER APPLICATION
Newly applied surfaces should be protected from water min for 4 hours The Bostik BoscoSeal Top – HT is slippery when or during rain. In order to get an anti-slip surface dry quarz sand can be sprinkled during curing period of the membrane.
PACKAGING
25 kg and 5 kg metal can.
